This roller press cylinder is the core pressing and gap-control element of the combined grinding system in cement roller presses. Mounted symmetrically between the press frame and the swing arm of the movable roller, it continuously provides an immense thrust (up to 5,387 kN) to press the movable roller firmly against the fixed roller. This creates a high-pressure crushing zone between the two rollers, squeezing the cement clinker or raw material into a dense cake, while simultaneously fine-tuning the roll gap and protecting the equipment from overload impacts. A super-large-bore, low-pressure high-thrust design, combined with a proprietary dual-spherical-joint anti-side-load structure, multi-stage seals with anti-pressure-trap drain ports, and high-capacity guidance, ensures long-term, leak-free, smooth pressing performance under the severe conditions of heavy impact, high-frequency micro-motion, and extreme dust. It is a key component for achieving low-cost, high-efficiency comminution.

This vertical mill cylinder is the core actuating and loading element in the raw meal grinding system of vertical roller mills. Installed in pairs or groups at the outer end of the grinding roller rocker arms, it applies a constant pulling (or pushing) force, pressing the rollers against the rotating grinding table to exert a precise comminution force on the material bed. Simultaneously, it regulates the roller gap and absorbs vibration impacts from uneven feeding, directly determining the fineness and output of raw meal or coal powder. A heavy-duty, ultra-high-pressure design with a maximum pulling force of up to 2,646 kN, combined with a proprietary dual-spherical-joint anti-side-load structure, multi-stage seals with anti-pressure-trap drain ports, and high-wear-resistant surface treatments, ensures long-term, smooth, and leak-free grinding load force under the severe conditions of heavy impact, high-frequency micro-vibration, and high cement dust concentrations. It is the core guarantee for stable high production in large-scale dry cement production lines.

This rollover cylinder is the core actuator of the grinding roller maintenance and inspection system in cement vertical roller mills and roller presses. Mounted between the roller turnover arm and the machine frame, it extends or retracts its piston rod to safely raise the massive grinding roller — weighing tens of tonnes — from the working position to the maintenance position, or lower it back after replacing wear liners. A long-stroke, high-thrust double-acting design with a maximum thrust of 1,688 kN, combined with a proprietary dual-spherical-joint anti-side-load structure, high-capacity guide rings, multi-stage seals, and anti-pressure-trap drain ports, provides safe, reliable, and smooth roller rotation movement in the high-dust, high-vibration, continuous-production environment of the cement grinding shop. It significantly shortens maintenance downtime and boosts cement production line availability.

This feeding cylinder is the core actuator of the grate bed drive system in cement clinker coolers. Mounted between the drive unit and the reciprocating grate bed, it extends and retracts its piston rod at high frequency to alternately push and retract the grate sections, conveying the hot clinker stepwise through the cooling air chambers for uniform cooling and continuous discharge. A long-stroke, high-cycle, vibration-resistant heavy-duty design with a maximum thrust of 385 kN, combined with a dual-spherical-joint anti-side-load structure, special anti-pressure-trap drain ports, wide high-capacity guide rings, and a multi-stage seal package, ensures precise, smooth, low-leakage reciprocating motion under the extreme conditions of the cement burning shop — radiant heat, heavy dust, intense vibration, and 24/7 operation. It is a key component guaranteeing clinker cooler efficiency and cement quality.